Converter optic, IR

camir_2.jpg
search
  • camir_2.jpg
  • camir.jpg

Reference number: DAT-Converter-IR

IR converter optics for Beam Profiler for measuring intensity distribution in the NIR range between 1480 and 1600 nm.

alt

Need more info?
Contact our expert.

Our Team

Description

Description

The IR-converter enables standard CCD cameras to image in the NIR range 1495-1595 nm. The converting module is inserted between a large format lens and a digital camera to give an instant imaging system which extends sensitivity into the telecoms wavelength bands.

Highlights

  • Extends the range of Si-based cameras to 1495 - 1595 nm
  • High resolution, low distortion and good uniformity
  • No image fading or lag
  • Large AR coated input window and optics
  • Cost effective

Parameter: Specification
Active Area: ø 27.5 mm
Spectral sensitivity: 1495 to 1595 nm
Peak conversion: 1510 and 1540 nm (no flat curve, multi-peak response)
Converted output: 950 to 1075 nm
Distortion: -1.0% barell distortion (inverted image)
Linearity: non-linear
Spectral transmission: 360 - 2000 nm @ F30.8
Max. illumination: 1 W/cm2 (damage threshold)
Dynamic range: 48 dB with digital cameras
Lens mount: C-Mount (adapters for others available on request)
Camera format: 1/2" format or greater
Dimensions: ø 46 mm x 97 mm, 210 g
Operating temp. range: -10° to +40°C



Further information can be found on the datasheet as additional information for download.